| PERFORMANCE |
| Sensitivity (±15 %) |
500 mV/lb |
112410 mV/kN |
|
| Measurement Range (Compression) |
10 lb |
0.04448 kN |
|
| Measurement Range (Tension) |
10 lb |
0.04448 kN |
|
| Maximum Static Force (Compression) |
60 lb |
0.27 kN |
|
| Maximum Static Force (Tension) |
60 lb |
0.27 kN |
|
| Broadband Resolution (1 to 10000 Hz) |
0.0001 lb-rms |
0.00045 N-rms |
[1] |
| Low Frequency Response (-5 %) |
0.01 Hz |
0.01 Hz |
[3] |
| Upper Frequency Limit |
36000 Hz |
36000 Hz |
[4] |
| Non-Linearity |
≤1 % FS |
≤1 % FS |
[2] |
| ENVIRONMENTAL |
| Temperature Range |
-65 to +250 °F |
-54 to +121 °C |
|
| Temperature Coefficient of Sensitivity |
≤0.05 %/°F |
≤0.09 %/°C |
|
| ELECTRICAL |
| Discharge Time Constant (at room temp) |
≥50 sec |
≥50 sec |
|
| Excitation Voltage |
18 to 30 VDC |
18 to 30 VDC |
|
| Constant Current Excitation |
2 to 20 mA |
2 to 20 mA |
|
| Output Impedance |
≤100 Ohm |
≤100 Ohm |
|
| Output Bias Voltage |
8 to 12 VDC |
8 to 12 VDC |
[5] |
| Spectral Noise (1 Hz) |
0.0000126 lb/√Hz |
0.0000562 N/√Hz |
[1] |
| Spectral Noise (10 Hz) |
0.00000424 lb/√Hz |
0.0000189 N√Hz |
[1] |
| Spectral Noise (100 Hz) |
0.00000149 lb/√Hz |
0.00000665 N/√Hz |
[1] |
| Spectral Noise (1000 Hz) |
0.000000522 lb/√Hz |
0.00000233 N/√Hz |
[1] |
| Output Polarity (Compression) |
Positive |
Positive |
|
| PHYSICAL |
| Stiffness |
6 lb/µin |
1.05 kN/µm |
[1] |
| Size - Hex |
0.625 in |
15.88 mm |
|
| Size - Height |
0.625 in |
15.88 mm |
|
| Size - Sensing Surface |
0.500 in |
12.7 mm |
|
| Weight |
0.80 oz |
22.7 gm |
|
| Housing Material |
Stainless Steel |
Stainless Steel |
|
| Sealing |
Hermetic |
Hermetic |
|
| Electrical Connector |
10-32 Coaxial Jack |
10-32 Coaxial Jack |
|
| Electrical Connection Position |
Side |
Side |
|
| Mounting Thread |
10-32 Female |
10-32 Female |
|
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
| Supplied |
| 080A81 |
Thread Locker |
(1) |
| 081B05 |
Mounting Stud (10-32 to 10-32) |
(2) |
| 084A03 |
Impact Cap |
(1) |
| M081A62 |
Mounting stud, 10-32 to M6 x 1, BeCu with shoulder |
(2) |
