208系列力传感谢器
产品描述
| PERFORMANCE | |||
| Sensitivity (±15 %) | 500 mV/lb | 112410 mV/kN | |
| Measurement Range (Compression) | 10 lb | 0.04448 kN | |
| Measurement Range (Tension) | 10 lb | 0.04448 kN | |
| Maximum Static Force (Compression) | 60 lb | 0.27 kN | |
| Maximum Static Force (Tension) | 60 lb | 0.27 kN | |
| Broadband Resolution (1 to 10000 Hz) | 0.0001 lb-rms | 0.00045 N-rms | [1] |
| Low Frequency Response (-5 %) | 0.01 Hz | 0.01 Hz | [3] |
| Upper Frequency Limit | 36000 Hz | 36000 Hz | [4] |
| Non-Linearity | ≤1 % FS | ≤1 % FS | [2] |
| ENVIRONMENTAL | |||
| Temperature Range | -65 to +250 °F | -54 to +121 °C | |
| Temperature Coefficient of Sensitivity | ≤0.05 %/°F | ≤0.09 %/°C | |
| ELECTRICAL | |||
| Discharge Time Constant (at room temp) | ≥50 sec | ≥50 sec | |
| Excitation Voltage | 18 to 30 VDC | 18 to 30 VDC | |
| Constant Current Excitation | 2 to 20 mA | 2 to 20 mA | |
| Output Impedance | ≤100 Ohm | ≤100 Ohm | |
| Output Bias Voltage | 8 to 12 VDC | 8 to 12 VDC | [5] |
| Spectral Noise (1 Hz) | 0.0000126 lb/√Hz | 0.0000562 N/√Hz | [1] |
| Spectral Noise (10 Hz) | 0.00000424 lb/√Hz | 0.0000189 N√Hz | [1] |
| Spectral Noise (100 Hz) | 0.00000149 lb/√Hz | 0.00000665 N/√Hz | [1] |
| Spectral Noise (1000 Hz) | 0.000000522 lb/√Hz | 0.00000233 N/√Hz | [1] |
| Output Polarity (Compression) | Positive | Positive | |
| PHYSICAL | |||
| Stiffness | 6 lb/µin | 1.05 kN/µm | [1] |
| Size - Hex | 0.625 in | 15.88 mm | |
| Size - Height | 0.625 in | 15.88 mm | |
| Size - Sensing Surface | 0.500 in | 12.7 mm | |
| Weight | 0.80 oz | 22.7 gm | |
| Housing Material | Stainless Steel | Stainless Steel | |
| Sealing | Hermetic | Hermetic | |
| Electrical Connector | 10-32 Coaxial Jack | 10-32 Coaxial Jack | |
| Electrical Connection Position | Side | Side | |
| Mounting Thread | 10-32 Female | 10-32 Female | |
All specifications are at room temperature unless otherwise specified.
Product Notes
[1] Typical.
[2] Zero-based, least-squares, straight line method.
[3] Calculated from discharge time constant.
[4] Estimated using rigid body dynamics calculations.
[5] Sensor contains protected electronics which may cause long 'turn-on" times.
[6] See PCB Declaration of Conformance PS023 for details.
Accessories:
| Supplied | |||
| 080A81 | Thread Locker | (1) | |
| 081B05 | Mounting Stud (10-32 to 10-32) | (2) | |
| 084A03 | Impact Cap | (1) | |
| M081A62 | Mounting stud, 10-32 to M6 x 1, BeCu with shoulder | (2) | |
产品图片
